The Connector Box
The Schmidt Array Connector Box is a clever addition to your pedalboard. It offers 6 stereo connections, which can of course also be used in mono.
Two of the sockets (YELLOW and GREEN) are connected if nothing is plugged into them at the outside of the box. This is extremely versatile if you are using setups with and without an Amp FX-Loop, meaning that without changing the internal cabling of your pedalboard your effects loop can automatically be moved in front of the amp signal by simply moving your amp return cable from the YELLOW to the RED socket.
It's also useful as an (optional) I/O connection for an external pedal i.e. a wah pedal and due to its stereo sockets, you can easily use an external Expression pedal or a typical Amp-footswitch in the board. The stereo sockets could be used also for balanced I/O or even as a Midi I/O with an adapter cable.
CONNECTION EXAMPLES - 1 AMP
CONNECTION EXAMPLES - 2 AMP
CONNECTION EXAMPLES -
SIMPLE SWITCHER
CONNECTION EXAMPLES -
PROGRAMMABLE SWITCHER
1 AMP
CONNECTION EXAMPLES -
PROGRAMMABLE SWITCHER
2 AMP
The Socket Plate
​
If you require alternative sockets to those in our Connector Box we can install a "Socket plate". This is a stainless steel plate that fits into the Connector Box aperture with up to three "D" flange sockets installed ie. XLR, MIDI, USB, Jack, powerCON etc. Where required we can also install internal cables with appropriate plugs.
​
Apart from the SA250 all boards have a minimum of two "holes", some three and the larger four as standard. This gives you the possibility of having a combination of Connector Boxes, Socket Plates and Patchbays.
The Patchbay
​
A 4-channel stereo patch bay to enable simple cabling up using shorter more manageable cables from the inside to the top deck.
Note: the Patchbay can only be installed into the holes in the back panel.
Out Tip: patch up to 4 pedals with one box using mono>stereo splitter cables.
