SA600 Lid
• Protect your pedals with a matching Lid for your SA600
• Built from multiplex and aluminium
• the inside is covered with 20mm acoustic foam
• the outside has 2 detachable hinges and 2 spring loaded latches
*all prices are +Tax @19% (in EU countries) and shipping costs.
** DON'T WANT TO USE THE SHOP? THEN JUST DROP US A LINE USING THE CONTACT PAGE AND WE'LL BE HAPPY TO GET BACK TO YOU.
Specs
• Inside headroom 60mm
• Acoustic foam 20mm thick
• Weight: 1,6 kg*all dimensions in millimetres
Lid installation instructions
If you order a Lid for your board at a later date it’s very easy to fit. The holes on the back for the hinges are already marked and you just need to follow these instructions for placing the lock to give the correct tension on the springs.
Mark the position of the top hole of the spring section of the lock (using a pointed tool i.e. Bradle). This is located on the centreline 27mm (1.06 inches) from the underside of the Lid “hook” which is pre-installed.
Tip: see picture after colour swatches.